D-STAR Gateway System
Terminal Mode lets your D-STAR radio reach reflectors directly over your home internet connection, with no local repeater or hotspot. Register an access-point call sign once, then follow the steps for your radio.
STATION: EA7IYR · REFLECTOR: REF075B
Do this once, before programming any radio. The Z entry you create here is the Terminal/AP call sign you will enter in the radio.
Log in to the D-STAR registration site where you registered, or https://regist.dstargateway.org.
Open the Personal Information tab. Check an empty slot, type Z in the Initial column, and check the AccessPoint box.
Z, AccessPoint checkedClick Update to save the entry.
Use the CS-9700 programming software on Windows, then write the settings to the radio.
Connect the IC-9700 to your network with a LAN cable to your router (or over Wi-Fi).
Open the Icom CS-9700 programming software.
Under Digital → Your Call Sign, add an entry with your name and call sign.
Under Digital → My Station → Call Sign, enter your station call sign. A suffix such as STN works well.
EA7IYR / STNUnder Digital → DV Gateway → DV Gateway Setting, enter the gateway settings:
| Gateway Select | Internal Gateway (LAN) |
|---|---|
| Gateway Repeater (Server IP/Domain) | auth.dstargateway.org |
| Terminal/AP Call Sign | YOURCALL Z |
| Gateway Type | Global |
| UDP Hole Punch | ON |
| Allowed Call Sign (Access Point Mode) | Disable |
The Terminal/AP call sign is your call sign padded to 7 characters, then Z, matching the entry you registered.
Under Digital → Repeater List → Group Name, name a group to hold your reflectors.
D-STAR group 01In that group, add one DV Repeater row per reflector module. Set Repeater Call Sign to the reflector and module (for example REF075B) and Gateway Call Sign to the reflector with G (REF075 G). Leave the frequency fields empty.
With the radio on the network, switch to Terminal Mode, link a reflector, then talk through it.
Press MENU below the display.
Touch 2 to show the second menu page, then touch DV GW.
Touch <<Terminal Mode>>. The FROM line now shows Terminal Mode (Int) with your Z call sign.
Touch the TO line, then Reflector.
Touch Link to Reflector.
Choose a reflector you've used before, or touch Direct Input and set the reflector, number and module with the + and – keys, then touch SET.
Key up briefly to send the link command. The radio links to the reflector.
Touch TO, then Gateway CQ, then your group name, then the reflector and module you linked.
Key up to talk on the reflector.
Instructions for the ID-5200 are being written. In the meantime, complete Registration; the gateway settings follow the IC-9700 steps closely.
Instructions for the IC-705 are being written. In the meantime, complete Registration; the gateway settings follow the IC-9700 steps closely.
Instructions for the IC-905 are being written. In the meantime, complete Registration; the gateway settings follow the IC-9700 steps closely.
La configuración del Icom ID-52A es la misma que se ha utilizado habitualmente para conectar con un reflector D-STAR mediante Terminal/AP Mode.
Abre el programa RS-MS3W en Windows y accede a los ajustes de Terminal/AP Call sign.
En Gateway Repeater (Server IP/Domain), introduce esta dirección:
auth.dstargateway.org
En Terminal/AP Call sign, introduce tu indicativo con el sufijo Z. En este ejemplo: EA7IYR Z.
Selecciona Global en Gateway Type, activa UDP Hole Punch y deja Allowed Call sign en Disable, tal como aparece en la imagen.
Pulsa Apply para guardar la configuración. Comprueba que el programa muestra el servidor auth.dstargateway.org y tu Terminal/AP Call sign.
Una vez configurado el software y conectado el ID-52A a Internet, podrás enlazar con el reflector directamente.
Para enviar la orden de enlace, selecciona el reflector con el formato REF075BL. La letra L al final indica la orden de enlace.
Después de establecer el enlace, selecciona el módulo al que quieras dirigirte. Por ejemplo, para hablar por el módulo B utiliza REF075B.
Con el módulo seleccionado, ya puedes realizar tus transmisiones y mantener QSO a través de REF075B.
Recuerda: REF075BL se utiliza para realizar el enlace; una vez enlazado, selecciona REF075B para utilizar el módulo B.